Music Hall PA1.2

$175.00

Phono Preamplifier

The Music Hall PA1.2 MM/MC Phono Preamplifier is the perfect solution for attaching a turntable to a receiver or integrated amplifier. The pa1.2 is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges.

This Product Qualifies for Free Shipping!

Description

Music Hall PA1.2 MM/MC Phono Preamplifier

The Music Hall PA1.2 MM/MC Phono Preamplifier is the perfect solution for attaching a turntable to a receiver or integrated amplifier.

The pa1.2 is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges. The beautifully finished extruded aluminum box wards off the effects of stray magnetic fields and provides a safe quiet environment for the sensitive electronics it houses thus providing you with the best sound possible from your turntable.

Enjoy a huge sonic upgrade with your LPs

If you’re plugging your turntable directly into the phono input of an integrated amp or receiver, did you know that you may be missing out on a lot of sonic goodness? That’s because a lot manufacturers use low-cost, low-fi circuitry that leaves your music sounding dull and two-dimensional. The Music Hall pa1.2 phono preamplifier boosts and equalizes the tiny voltages coming from your ‘table’s phono cartridge to deliver a robust, line-level signal infused with rich, dynamic sound.

You’ll experience the thunderous impact of a timpani as the mallets strike home, and thrill to the shimmering reverberation of strings and cymbals as they echo off the concert hall walls. Your music will shine with new levels of energy.

The Music Hall difference

The pa1.2 features virtually ruler-flat response, extremely low distortion, and very low noise. Its handsome extruded aluminum chassis shields against electromagnetic interference for quiet operation. Plus, its inputs are compatible with either moving magnet or moving coil cartridges, to ensure easy plug-and-play hookup with virtually any turntable and cartridge combination.

Need a cable?

This phono preamp does not come with an RCA cable to connect to your receiver or amp.

Additional information

Weight 3 lbs
Dimensions 6 × 4.2 × 2.1 in

feature list

  • gain mm/mc 40dB / 60 dB
  • input sensitivity mm/mc 5mV/1kHz / 0.45mV/1kHz
  • input impedance mm/mc 47Kohms/120pF / 100 ohms/120pF
  • output voltage typically mm/mc
    300mV at 1KHz – 3mV (MM Input) / 0.3mV (MC input)
  • total harmonic distortion mm/mc <0.01 / <0.05%
  • riaa curve accuracy 20Hz-20kHz / 0.5dB
  • snr mm/mc -86dB / -68dB (-94dB / -75 dB A weighted)
  • input voltage 15V/300mA AC
  • external power supply
  • rigid extruded aluminum chassis

technical specifications

  • w4.2 x d6 x h2.1 in.
  • 3 lbs. pkg.

Reviews

There are no reviews yet.

Be the first to review “Music Hall PA1.2”

Product Enquiry